ARSP-1/2.DCK - ACHILLES v3 [RESPOST(?)]

WHAT TO DO WHEN YOU PLACE THE SCHEMATIC:

1. Assemble the airship with a physics assembler

2. Go inside the balloon (which can be accessed through the trapdoors above the doors), then go to the engine and waterlog the steam engine block that is connected to the boiler horizontally, as well as the shaft that is being powered by it, you can place water facing the 3 stripped logs right beside.

3. To start moving, you'll need to feed the two hoppers above the cockpit and also the portable engine beside them.

The original post contained the v1 and the v2, I decided to delete that one and post just the v3. The interior screenshots within this post are a bit outdated, but still pretty much the same thing.

In the ACHILLES v3, I changed the way to power the ship entirely, going for a steam engine design that was sent by @naberville3 in the Create: Aeronautics Discord server.

Old top speed: ~3.30m/s

New top speed: ~13.80m/s

(Unfortunately, since the new engine is inside the balloon, the ship height is a bit more limited)

(The AnalogAudio mod is just decorative and won't affect how the airship works)