"Bloop" | Survival-Friendly Airship

UPDATE: SHIP SCHEMATIC HAS BEEN FIXED

My first airship, has a max speed of around ~15.7 m/s. Includes some storage, a camera (Vista), anchor (opposite of dock lever, the copper bulb) and laser detection system to automatically un-dock the airship when it is above a certain height.

STEPS FOR ASSEMBLING:

1. Assemble using the Physics Assembler from inside. Make sure the balloon and the ship are docked when doing this, and that you are in close proximity to a dock in order to refuel at the next step.

2. Break and replace the fluid tanks and/or diesel engines if they are not already connected. (There shouldn't be a line between both diesel engines on both the ship and inside the balloon).

3. Use the hand-crank inside the ship to crank all the burners to the highest setting (red).

4. Dock the ship in order to refuel with diesel or gasoline. MAKE SURE THE BALLOON'S (NOT THE SHIP!) FUEL TANK IS FILLED TO THE MAX, OTHERWISE YOUR FUEL WILL RUN OUT EXTREMELY QUICKLY.

5. Connect each rope connector from the ship to the balloon.

6. OPTIONAL: Make sure the anchor (sticker) is on. The copper bulb indicates whether the sticker is on or not. You may want to do this if you set the right throttle lever by more than 1 on the next step.

7. From your perspective while in the driver's seat, turn the right throttle lever by at least 1, and wait for a few seconds. Afterwards, turn off the rightmost vanilla lever to assemble the balloon.

8. Fly! (Or if you followed step 6, turn off the anchor and fly!)

Have fun! (Arm-compatible version coming soon!)