Crimson Engine

https://www.schematicannon.com/schematics/the_megatronian_airship      original hull
https://createmod.com/schematics/steampunk-airship                                 creation wich original was based off
 
paste with creative
 
1. turn on physics
2. add ropes to outside wings 4 pcs
3. handcrank water into the boiler until self sustaining
4. lava can be added under the floor in tanks or siphoned by using the typewriter near engine, use with up and down arrow.
 
built by schematicannon
 
1. turn on physics
2. add shafts to steam engines
3. flick the interior machine clutches off
4. add fluids. water below the engine and in a pool inside the balloon. water and lava to the bulk processor. 
IF FIRETICK TURNED ON, FIREPROOF THE BULK PROCESSORS LAVA SOURCE
5. handcrank water into the boiler until self sustaining
6. add 3 empty buckets to the lava filler behind the engine
7. fix the display links   (links inside balloon, acces via trapdoors in ceiling.)
small board line 1: rear of ship: remaining SU
small board line 2: rear of ship: rpm
big board line 1: above cockpit: relative speed
big board line 2: above cockpit: height
big board line 3: above cockpit: air pressure
big board line 4: up on a burner: total lift
 
8. add ropes to outside wings 4 pcs
9. inside engine is a switch that allows to stop using the lava system. this stops the lava siphoning too.
 
mods needed
create
create:aeronautics
 
"Activate stabilizer" engaces the 6 large back flaps to balance when moving.
 
"Dock" activates the bottom and front docking ports, bottom port can input lava.