Fast Zeplin

Fast Zeplin
CreatorMad_old_guy
CategoryFlying Machines
Size23 × 24 × 107 blocks
Blocks5,791
Minecraft1.21.X
Create6.0.10
ModsAeronautics, Create, Simulated, Aeroworks, Createthrusters, Cookingforblockheads, Bits n bobs, Createpropulsion, Chipped, Pipez, Enderstorage, Mcwfences
Downloads14
Added2026-10-07

Schematic by Mad_old_guy, published on CreateMod.com. This page lists what it contains; download the file from the creator’s page.

I wanted to build a fast airship to travel long distances in the Overworld and the End. It reaches speeds of 38 blocks per minute.

This was built in All the Mods 10 - Aeronautics, but does not require that modpack to be used.

I use a linked controller (not on the ship) to control forward, back, left and right. You can also steer with the rudder, though that is very slow. You will have to set a linked controller to the Redstone Links.

Conveyors may need chains reattached. All of the Display links will need to be re-linked. On the Display board I have speed, altitude, X and Z angle, and remaining SU. The nixie tubes have speed and altitude.

This ship also uses ender tanks from the EnderChest mod linked to an unlimited Lava source and the Pipez mod for piping. The water source was a sink from the Cooking with Blockheads mod.

This zeplin uses 3 steam engines. Two for lift. One for the engines and other machines. It is way over powered and has plenty of SU left over for other machines and contraptions. I left the inside mostly unfinished to give the user options on layout.

Materials · 65 types · 5,791 blocks
White envelope3,742
Polished deepslate slab458
Industrial grating panel401
Spruce slab175
White sail144
Shaft109
Industrial iron block107
Fluid tank72
Framed glass69
Gray sail64
Dark oak slab38
White symmetric sail37
Encased chain drive32
Liquid burner27
Pegged spruce planks27
Spruce log26
Spruce trapdoor24
Framed spruce planks20
Gearbox20
Tall lantern17
Andesite casing15
Iron block15
Polished spruce planks14
Fluid pipe12
Redstone link12
Steam engine9
Powered shaft9
Display board9
Display link7
Andesite encased shaft7
Andesite encased cogwheel5
White wool5
Gyroscope4
Variable transmission4
Chain conveyor4
Nixie tube4
Propeller bearing3
Ender tank3
Sink3
Throttle lever3
Steam vent2
Copper door2
Andesite door2
Industrial iron encased cogwheel2
Vertical framed glass2
Swivel bearing2
Spruce pressure plate2
Stressometer2
Iron handle2
Spruce planks2
Lantern1
White seat1
Physics assembler1
Altitude sensor1
Directional gearshift1
Oak pressure plate1
Rope connector1
Steering wheel1
Large cogwheel1
Joystick1

and 5 more block types

More in Flying Machines

See all