Oil Refinery (read description)

This schematic is a fully customizable charcoal powered crude oil/heavy oil distillation chamber for the builders of create who don't do the machine building part of create the factory must grow. There are barely any decoration blocks within this build and its in a square so it will be easy to encase in a factory or hide underground.

This is for TFMG oil distillation, the only outside help it needs is a charcoal feed into the item vault below the heavy oil distillation chamber for the mechanical arms to feed the blaze burners. but a good tree farm and a bulk blaster with connected has you covered.

Small fixes before it starts forever:

Petrol's parts doesn't like to load tubes for hydraulic transmissions or pneumatic tubes through schematics although its very obvious where they connect to or look at the images for reference.

The pumpjacks aren't connected to the centre power, without this it the pumps were physics objects so they wont show up on the schematic blueprint. an easy fix, 2 extra shafts need to be placed at the centre to power them. (the spots shouldn't be hard to miss.)

Fully relies on a good inflow of charcoal, without it the blaze burners don't work. (I have a schematic for an amazing tree farm that mainly makes charcoal on my page if you need a schematic for that.) This will be the longest extra bit for it either way.

An infinite water source has to be created underneath the pump of the steam engine which also has to be kickstarted best way to do this is to disconnect 2 of the encased chain drive's and use a waterwheel to power the water pumps so that the steam engine starts before putting those chain drives back.

the fixes seem long and boring but all but the charcoal generator overall would take you under 20 minutes depending on if you have the mats upfront

After all these small fixes it will run forever and keep making you all of the gasoline kerosene or Diesel you could ever dream of!