Plutonic Mk1 Mining Vehicle

Mining vehicle with adjustable borehead. Inspired by the build of YouTuber TinStarfish. I created two versions. One that uses Mechanical Belts, more stable but with some limitations in locomotion, mainly for climbing blocks and with a problem of sliding slowly on its own. Another that uses only tires and has better locomotion.

Controls:

w=forward

s=backward

a=left

d=right

q=locks/unlocks borehead movement

up arrow=borehead raises

down arrow=borehead lowers.

Throttle Lever near the seat=turns on/off/adjusts movement speed

Throttle Lever in the container=turns on/off/adjusts borehead speed.

Lever in the left corner=only interrupts the contraptions of the front part of the vehicle.

(WARNING 1: You may need to reverse the commands in the Linked Typewriter in both versions) (WARNING 2: For some reason, the seat was not included in the materials list, as well as the Linked Transmitter on the Throttle Lever that controls the Boreheads. In this case, just place them manually. Place an nugget on the red frequency and a wood pickaxe on the blue frequency of the Transmitter associated with the Boreheads' Throttle Lever)

(WARNING 3: You may need to adjust the Directional Gearshift that controls movement in the tracked version.)

How to assemble:

I advise against rotating the schematic and placing it on a completely flat surface. First, use the Physics Assembler on the vehicle part. Then start the steam engine. Place two buckets of water on top, remove and replace the Sapper from Create:Rubberworks, place a coal in the Portable Engine and a bucket of lava in each Blaze Burner. There will be a lever near the left rear wheel. Activate it to make the Sapper extract lava faster from the Crimson Tree.

After that, activate the Swivel Bearing at the front and use the Physics Assembler on the Boreheads. Use a slime to join the parts. I advise checking if the Iron crates in Create: Fantasizing Again have maximum inventory capacity, otherwise you will not be able to mine.

The Schematic comes with a "Discharge Station" for the Miner. It uses a Docking Connector to align the Transporters, allowing you to transfer items from the container to another storage.