Schwerer Gustav with create aero

hehe, Heavy Gustav on wheels :)

This schematic includes the computer that controls the cannon. To make it work, you will also need two additional mods:

• CC:CBC – controls the cannon.

• CC: Sable – helps determine contraption coordinates.

The code is available on Google Drive:
https://drive.google.com/drive/folders/1RhOs4YWhJ3JvR5fO07eUiCZgoForMIir?usp=sharing

This setup uses two computers. The pocket computer has to be wireless.

Run the solo program on the cannon control computer.

On the pocket computer, run:
fire x y z

where x, y, and z are the target coordinates.

For example, if the cannon control computer has ID 6 and the pocket computer has ID 7:

• In the pocket computer code, set CANNON_ID = 6.

• In the cannon control computer code, set CONTROL_ID = 7.

Everything else is explained in detail with comments in the code, so you should be able to figure it out.

ALSO IMPORTANT: for it to work you have to disable cannon damage in mod settings

Also, notice the sticker underneath Gustav. Stick it to a solid block before firing so the cannon cannot move from the recoil. Simply place two blocks underneath it and activate the sticker. After firing, deactivate the sticker and remove the blocks.

Finally, don't forget to place the payload schematic in its correct position (at the very tip of the cannon loader) as it is shown on the picture and set the deployers filters with the schematic. the screen of how the payload schematic should look like is attached. put your gunpowder charges and shells into the barrels in the loading mechanism