СhertoSLOT (I fixed the errors)

СhertoSLOT (I fixed the errors)
CreatorBobos
CategoryFlying Machines
Size23 × 17 × 19 blocks
Blocks1,393
Minecraft1.21.X
Create6.0.10
ModsCopycats, Simulated, Create, Create radar, Offroad, Aeronautics
Downloads8
Added2026-09-02

Schematic by Bobos, published on CreateMod.com. This page lists what it contains; download the file from the creator’s page.



!The build uses only mods (Create, Create Aeronautics, Copycats, and Create Radars)!

throttle control

Right throttle lever – forward power control (15 = stop, 0 = full throttle)

Left throttle lever – vertical power control
(15 = stop, 0 = full throttle)

in the frequency controller:

Right-click the console with the frequency controller to start controlling it.

The frequencies are shown in the photo
Forward – W
D – stops the right engine, resulting in a right turn
(same applies to A)

S is starting the engines in reverse.



Open rear door (Minecart; Shift at the bottom)

To start the steam engines, you need to:

1 Lower the clutch lever shown in the photo.

2 Place any combustible item (lava buckets are not recommended) into the chest inside the cab that has an item frame on it.

3 Fill both boilers with water and use the handle to pump it into the tank.

4 Wait until the mechanical arms have loaded fuel into all the blaze burners.

Just to be safe, check that the mechanical arms are set to mode 3.

For the radar, reconnect it to the Network Controller shown in the photo.

Specifications
Maximum speed: 68 meters per second
Maximum altitude: 265

Mass 908.50

If you find a mistake, please let me know in the comments and I will fix it

Thank you


Materials · 73 types · 1,393 blocks
Copycat board380
White symmetric sail304
Fluid tank144
Oak slab136
Andesite casing58
Copycat stairs56
Framed glass48
Framed glass trapdoor43
Radar dish block22
Water21
Andesite encased cogwheel21
Mechanical pump20
Blaze burner19
Copycat slab19
Chest14
Redstone link14
Steam engine13
Powered shaft13
Copycat vertical stairs10
Gearbox8
Iron handle8
Cogwheel6
Copycat folding door6
White wool6
Encased chain drive5
Copycat slope5
Andesite encased large cogwheel4
Wheel mount4
Andesite encased shaft4
Gantry shaft4
Analog transmission4
Propeller bearing4
Hand crank3
Clutch3
Radar plate block3
Depot3
Stressometer3
Basin2
Mechanical arm2
Item drain2
Directional gearshift2
Gyroscopic propeller bearing2
Shaft2
Display link2
Data link2
Mechanical press2
Throttle lever2
Altitude sensor1
Sequenced gearshift1
Gantry carriage1
Millstone1
Lectern1
Network filterer1
Velocity sensor1
Lever1
Brass belt funnel1
Nixie tube1
Rope winch1
Monitor1
Copycat trapdoor1

and 13 more block types

More in Flying Machines

See all