SKY WARDEN WAR BLIMP

I know that this is is gonna be long but to use this schematic properly there is a bit of setup.

To Board the ship there are handles just before the front of the ship to grab and climb on. if the engine is already on you can use a wrench to hook onto the cogs in the same area to be pulled up instead.

STEP 1: input fuel with docking connector at the bottom end of the ship then use the hand crank on the top deck to start the engine if all engine shafts are connected. (image shown)

STEP 2: Activate all cannons with the lever on the front of their mounts. Load cannon ammo from the smart chute above deck, do this while the ship is not an assembled physics contraption because the belts and ejectors are strange otherwise. Load HE with inertia fuses (can change the filters for different ammo) and big cartridges with 4/4 powder. If you want even ammo in all cannons only drop 56 items in the chute at once.

STEP 3: Assemble the ship and controls are listed
height - throttle lever
left/right - a / d

up/down arrow keys - cannon pitch
left/right arrow keys - fire left/right side cannons
Q - main engine clutch (allows you to use hand crank)

CTRL - Propeller Clutch

Space - propeller speed up

Shift - propeller slow down

P - docking connector

Also connect ropes and girder strut aesthetics.
Spent big cartridges are collected at the top deck. place a funnel to retrieve them.

That is all for setup and enjoy the destruction. Let me know with a comment if this setup guide is good as is or if there is something I have missed, feedback much appreciated. :)