Woodpecker AH-05c(AH-6 Little birds -TRIBUTE)

Woodpecker AH-05c(AH-6 Little birds -TRIBUTE)
CreatorEdgeworthmuzzry
CategoryFlying Machines
Size17 × 10 × 23 blocks
Blocks431
Minecraft1.21.X
Create6.0.10
ModsCreate, Copycats, Simulated, Createbigcannons, Aeronautics
Downloads100
Added2026-10-11

Schematic by Edgeworthmuzzry, published on CreateMod.com. This page lists what it contains; download the file from the creator’s page.

这是一架轻型武装侦察旋翼机, 原型为美国的 小鸟直升机MD-500。 我根据create的动力系统调整了一些操控性能与部件结构, 并加上了独属于minecraft的美学点缀。

它使用现代直升机的主旋翼倾斜的方式来实现运动与机动, 配备八挺交替开火的悬挂机枪, 支持燃料的自动装填。

  • 下载与部署

  1. create:bigcannons 模组可以不加装, 你会得到一架无武装的轻型侦察直升机 (为 多斯【doss】的追随者准备);

  2. copycat+ 模组是必须的, 原理图有很多 create:connected 无法完全替代的伪装方块。

  3. 如果有修改驾驶键位的需求, 可以下载附加文件 ”wp_keybinding.nbt“ 。 由于我的驾驶习惯很诡异, 建议大家都额外下载它来方便键位修改。

  4. 如果你有 photomancy 模组, 可以下载附加文件 “wp.nbt-assembled version“, 拖入 sable-schematics 文件夹,直接加载物理化组装、燃料与弹药装填均已完成的版本;

  • 启动与进入

下面的说明在原理图中也有告示牌指引, 可以在遇到疑惑时再回来阅读。

  1. 可以先进行后面的步骤, 或者先用机身上的组装器将其物理化组装;

  2. 关于燃料: 燃料输入口在主驾驶位两侧的 漏斗【hopper】, 往里面投入煤炭(来自第一次工业革命的伟大能源), 记得先给任一引擎喂食煤炭以激活自动装填。

  3. 关于武器:它的两翼悬挂着八门机枪, 需要拉下机翼活板门下方的四个拉杆来加载它们。 随后往机翼上的八个 漏斗【hopper】 放入机枪或机炮弹药。

  • 关于驾驶

再次提一嘴, 我的个人驾驶键位很诡异(S是前进,W是后退), 大家可以下载”wp_keybinding.nbt“ 来方便键位修改。 如果还是觉得太麻烦——可以尝试使用右侧驾驶位, 右边的打字机键位可能比较符合大家的操作习惯。
左右驾驶位的打字机驾驶键位不同。驾驶键位在原理图中有剪贴板说明, 但贴的位置及其显眼且难看 —— 你迟早要把它撕掉的。

  1. 左驾驶位是经典的双手键盘驾驶:

I/K:主螺旋桨 加速/减速
J/L:左/右 偏航(旋转)
W/S:上仰/俯冲(后退/前进)
A/D:左/右 翻滚

space:翼挂机枪开火

shift(按住):反转螺旋桨推力方向(在直升机失控或卡住时很有用)
F:开关螺旋桨陀螺仪稳定功能

  1. 右驾驶位则是单手键盘驾驶:

shift/ctrl:主螺旋桨 加速/减速
Q/E:左/右 偏航(旋转)
S/W:上仰/俯冲(后退/前进)—— 正常的W前进S后退,与左驾驶位相反。
A/D:左/右 翻滚

space:翼挂机枪开火

C(按住):反转螺旋桨推力方向(在直升机失控或卡住时很有用)
F:开关螺旋桨陀螺仪稳定功能


在驾驶位与尾翼下均有一个 辉光管【nixie tube】, 它反映主旋翼的转速, 在信号值为0时转速达到最大值.

尾翼上有一个指示灯, 当它亮起时表示螺旋桨的陀螺仪稳定功能被关闭, 在按下F或进行主旋翼倾斜操作时都会亮起。

  • 最后

祝你玩得开心, 如果有任何问题请随时留言。

This is a light armed reconnaissance rotorcraft, based on the American MD-500 Little Bird helicopter. I adapted some handling characteristics and structural components to fit Create's power system, and added unique Minecraft aesthetic touches.

It uses modern helicopter cyclic/tilt-based main rotor movement for mobility and maneuvering. It is equipped with eight alternating-fire suspended machine guns and supports automatic fuel loading.

  • Download & Deployment

  1. Create: Big Cannons is optional. Without it, you will get an unarmed light reconnaissance helicopter (prepared for the followers of Doss).

  2. Copycats+ is required. The schematic contains many copycat blocks that Create: Connected cannot fully replace.

  3. If you need to modify keybinds, you can download the add-on file wp_keybinding.nbt. Since my driving habits are quite strange, I recommend everyone download it for easier keybind modification.

If you have the Photomancy mod, you can download the add-on file wp.nbt-assembled version, drop it into the sable-schematics folder, and directly load the fully assembled, fuel-loaded, and ammo-loaded physicalized version.

  • Startup & Entry

The following instructions are also available on signs in the schematic. You can come back and read them if you get confused.

  1. You can either do the later steps first, or use the assembler on the fuselage to physicalize and assemble it first.

  2. About fuel: The fuel input is in the hoppers on both sides of the main pilot seat. Put coal inside (the great energy source of the First Industrial Revolution). Remember to first feed coal into any one engine to activate automatic loading.

  3. About weapons: Eight machine guns are suspended under the wings. You need to pull the four levers under the wing trapdoors to load them. Then put machine gun or autocannon ammunition into the eight hoppers on the wings.

  • About Driving

Once again, my personal driving keybinds are very strange (S is forward, W is backward). You can download wp_keybinding.nbt to easily modify keybinds. If that still feels too troublesome, you can try using the right pilot seat. The right typewriter's keybinds may be more in line with everyone's habits.
The left and right pilot seats have different typewriter driving keybinds. The driving keybinds are explained on a clipboard in the schematic, but its placement is extremely obvious and ugly—you will tear it off sooner or later.

  1. Left Pilot Seat — Classic two-handed keyboard driving:

I / K: Main propeller accelerate / decelerate
J / L: Yaw left / right (rotate)
W / S: Pitch up / down (backward / forward)
A / D: Roll left / right

Space: Fire wing-mounted machine guns

Shift (hold): Reverse propeller thrust direction (very useful when the helicopter is out of control or stuck)
F: Toggle propeller gyroscope stabilization

  1. Right Pilot Seat — One-handed keyboard driving:

Shift / Ctrl: Main propeller accelerate / decelerate
Q / E: Yaw left / right (rotate)
S / W: Pitch up / down (backward / forward)
— normal W forward, S backward, opposite to the left pilot seat.
A / D: Roll left / right

Space: Fire wing-mounted machine guns

C (hold): Reverse propeller thrust direction (very useful when the helicopter is out of control or stuck)
F: Toggle propeller gyroscope stabilization

There is a Nixie Tube under both the pilot seat and the tail. It reflects the main rotor speed. When the signal value is 0, the rotor reaches maximum speed.

There is an indicator light on the tail. When it is lit, it means the propeller gyroscope stabilization is turned off. It will light up when you press F or perform main rotor tilt operations.

  • Finally

Have fun, and feel free to leave a comment if you have any questions。

Materials · 69 types · 431 blocks
Industrial iron block133
Copycat slope layer42
Copycat half panel31
Modulating linked receiver27
Copycat layer25
Shaft20
Layered deepslate20
Black stained glass19
Steel autocannon recoil spring16
Copycat step14
Copycat stacked half layer13
Copycat slice11
Black symmetric sail11
Copycat half layer11
Hopper10
Polished deepslate10
Gray envelope9
Cogwheel8
Copycat panel8
Light gray symmetric sail8
Cherry wall sign8
Fixed cannon mount8
Steel autocannon breech8
Black portable engine7
Encased chain drive6
Copycat flat pane6
Andesite alloy block6
Copycat fluid pipe5
Gearbox5
Redstone link5
Copycat vertical slice4
Copycat pane4
Copycat shaft4
Copycat trapdoor4
Copycat sliding door4
Andesite encased cogwheel4
Lever4
Cherry sign4
Belt4
Gray symmetric sail3
Deepslate pillar3
Analog transmission3
Directional gearshift3
Swivel bearing2
Wooden propeller2
Linked typewriter2
Analog lever2
Clipboard2
Black seat2
Torsion spring2
Nixie tube2
Iron handle2
Redstone accumulator1
Depot1
Black sail1
Industrial iron window1
Water wheel1
Stressometer1
Repeater1
Powered toggle latch1

and 9 more block types

More in Flying Machines

See all