Cargo airship (working, empty)

IMPORTANT! READ INSTALATION FIRST

My first working airship

I've made it empty, so you can customize it as you want 

I hope you like it, don't forget to rate it, and I read the comments. If you have any issues or suggestions, please let me know. ☺

Made on 1.21.1 NeoForge

Dependences:

• Create Aeronautics (1.0.2)


• Sable (1.0.4)

Features:

• There is a mechanism in the hold of the ship that allows you to open the bottom, you can use a winch to pull cargo onto the ship or use it for other purposes (for example, dumping dynamite)


• Fully functional controls - steering wheel for turning, two levers for adjusting the speed and height of the ship


• In the hold, in the front of the ship, there are iron blocks used to balance the ship, during customization, you can remove and add them.

Instructions

• Аfter downloading the scheme, you will find several multi-colored woolen blocks, which are not necessary, but they indicate how to place the ropes to match the photo


• There are 4 engines in total that are responsible for rotating the blades


• Left lever (which is closer to the steering wheel) - height


• Right lever (which is further away from the steering wheel) - speed


• After construction, before launching, make sure that the steering wheel is set to be max 45 degrees and both propeller bearings set to work counterclockwise, also use rope coupling to connect rope winch and docking connector

For levers:

• heigh 15/15 = y:224


• heigh 9/15 = y:95


• speed 0/15 = base speed (engine power)


• speed 5/15 = max speed (at this schematic, you can add more engines for more stress/speed)


• speed 15/15 = stop