Floater (Aeronautics, flying ship, small base)

Info

This is a Flying ship with 78KpN Lift (At 150% air pressure) and can go up to 300 blocks, it has 2 fully sustainable propellers which can output 13KpN Thrust (At 150% air pressure) and that can make the ship go 9Bps at max altitude. It has a cockpit, lights, deck and under the deck is a storage room.

How to set it up at post build.
First you have to glue the ship together, use honey glue and right click the placed dirt blocks and use slime glue (if it isn't already glued) for the windmill.
Then you can remove the dirt blocks as you don't need those anymore, now right click on all of the bearings (2 for the wings, and 2 per engine), you would notice that the windmill would start and the propeller would spin, if you don't want it to spin then go into the cockpit and turn the thrust to 15.
Double check that you have glued everything and then assemble the ship.
You don't have to have iron in the front, it is just there to balance out the weight.

Controls

For lift off you want to turn the lift throttle lever to 15 (or your desired number) and to land turn it to 0 and you will be descending.
To go forward turn the thrust throttle lever to max 11 (more will over stress it and at 15 the engine would be off) and at 0 the propeller would be going the same speed as the windmill.
To turn left you want to turn off the left engine by hitting the lever for turning the left engine off, for turning right you want to hit the right lever.
The lever where it says "Reverse Thrust" it will make the propeller go backwards.
The button where it says "Lamp" it will toggle the lamps on the ship.
And the steering wheel will rotate the wings of the ship.
The linked typewriter controls the left engine with a and the right engine with d, reverse thrust with w and toggle lamps with s.